Features：

●Dedicated to water-based liquid cleaning stencil and PCBA process of high-pressure spray systems.

●Double liquid groove, achieve the cleaning and rinsing demand.

●Process: Cleaning-Chemical isolation- Rinsing(Open / close loop) - Drying

● Preparation of fully automatic touch screen operating software, save program file and easy to use.

●Cleaning count feature that automatically aggregate cleaning number of stencil and filtration cycle times.

●Liquid and pump pressure gauge can be displayed by panel

●Cleaning pressure can be adjusted independently, A wide process window

●Resistivity meter monitoring rinse to ensure cleanliness

●It supplies filter life monitoring alarm

●Stainless steel canbinet with good reliability and can resisit any hurt by acid and alkali cleaning chemistry.

●Rinsing liquid emission filtering that more environmental friendly;

Technical Data:

Stencil Size：Max 800mm(L) ×750mm(W) × 40mm(H)

Liquid Tank Capability：Max 50L*2PCS

Cleaning、Rinsing Method：Move up and down spray liquid through high pressure spray liquid

Drying Method：High pressure hot air

Clean Time Setting：2-5 Minutes

Clean Dry Time:1-2 Minutes

Rinse Time Setting：1 Minutes

Rinse Times: 1-99(set)

Drying Time：3-5 Minutes

Clean Cycle Filtering ： 1 filter：10μm

2 filter:   1μm

ing Discharge Filter：1μm(Filter tiny impurities)

Liquid Heating Temperature：Room temperature～70℃

Resistivity Meter Range: 1MΩ－15MΩ

Compressor Air：0.45Mpa ～ 0.7Mpa

Power Supply：AC380V 50HZ 60A

Outlet Size：Φ124(W)×30mm(H)

Net Weight：600Kg

Machine Size：1560mm(L) ×1160mm(W) × 1850mm(H)