Characteristic：

Application of high pressure spray system, which is specially used for cleaning the stencil, PCBA, printing plate, fixture and so on

Dual liquid tank, cleaning and rinsing needs

Single cleaning two nets, improve cleaning efficiency.

Process flow: Cleaning - chemical isolation - rinsing (open / closed loop) - drying

Equipped with advanced automatic touch screen operation software, which is extremely simple to use

* system counting function, can automatically accumulate the number of cleaning nets and the number of cycles

Liquid and pump pressure can be displayed through the panel pressure gauge

Cleaning pressure can be adjusted independently, the process window is wider

Resistivity monitoring rinse solution to ensure cleanliness

Supplies life monitoring alarm

Stainless steel body is strong and durable, acid and alkaline cleaning solution

Rinse liquid filtration, more environmentally friendly

Technical parameters:

Applicable size: 800mm (L) * 750mm (W) * 40MM (H) special size to be customized

Net number of single cleaning: 2

Cleaning fluid capacity: 60L*2PCS (max)

Best liquid usage: 50L*2PCS

Cleaning method: up and down moving high pressure liquid jet

Drying: high pressure hot water

Cleaning time: 2-5 minutes

Cleaning liquid isolation time: 1 minutes

Rinse time: 2-5 minutes

Drying time: 2-5 minutes

Cleaning liquid recycling filter: 0.45 m (filter micro: solder paste, rosin, flux and pollutants)

Rinse liquid recovery / discharge filtration: 0.45 m (filter micro: solder paste, rosin, flux and contaminants)

Liquid heating temperature: room temperature to 60 C

Noise: less than 50 dB

Resistivity tester range: 0 ~ 18M ohm

DI water supply: 30 ~ 60L/min?

Water pressure: DI = 0.4Mpa

DI water inlet and outlet connections: 1 inch

Air supply: 0.45Mpa ~ 0.7Mpa

Power supply: AC380V 50HZ 80A

Total power: 38KW

Machine weight: 600Kg

Vent size: 123 (W) * 30MM (H)

Machine size: 1820mm (L) * 1200mm (W) * 1890mm (H)